설명

문의 보내기

Electric Actuators

General Applications

The EPI2 electric actuator is available in six sizes and is designed for on/off or modulating control of the valve that the actuator is mounted to. The actuator is suitable for installation in a wide range of plants, including heavy industrial, chemical, petrochemical, and onshore/offshore Oil and Gas installations.

Features

· Low- or high-voltage power supply (DC, single-phase AC, or three-phase AC)

· Multiple adjustable stroking times to suit specific applications

· Interchangeable base plate and range of shaft inserts enable simple connection to any valve type

· Over-temperature protection is provided by a sensor located within the control enclosure, as to limit the temperature of the motor and control system

· Epicyclical gearing ensures reliable and smooth operation

· Top-mounted position indicator

· Constantly-engaged manual override (for use when power is lost), featuring a handwheel that does not rotate while the motor is in operation ·Optional local control panel for manual valve operation with additional open/closed indicator

· Simple upgrade options for modulating control and network communication via DeviceNet or Profibus DP protocols

· Latched-type output contacts for fully open/ fully closed remote indication. Output contacts for monitor and blinker/local selector indication are also available

Technical Data

Power supply: Single-phase from 24 to 48 V DC or AC at 50/60 Hz Single-phase from 100 to 240 V DC or AC at 50/60 Hz Three-phase from 208-240 V AC, 380-480 V AC, and 500-575 V AC

Voltage fluctuations: +/-10%

Frequency: +/- 5%

Torque output: From 35 Nm to 2000 Nm / 26 lb.ft to 1475 lb.ft

Ambient temperature

Standard temp range: -25 °C to +70 °C / -13 °F to 158 °F

Low temp range: -40 °C to +70 °C / -40 °F to 158 °F

Conduit entry: M25 (Qty 4) or 1" NPT (Qty 4) 90° ± 10° each direction (70° min and 110° max)

Component Parts - 063/E006 - 125/E013 - 250/E025 - 500/E051 - 1000/E091

product-569-507